This IP65 230V high frequency non-corrosive fluorescent fitting from Knightsbridge is ideal for use indoor and outdoor such as warehouses, cattle sheds, barns, or hallways.
Houses two 18W 2ft T8 lamps (not supplied with fitting), and is simple to install, with built-in Bracket for wall/ceiling mounting and 10 fixing clips for the diffuser supplied.
This model features integral emergency power via an internal battery for up to three hours with an LED indicator. Electrical termination via 10Amp connector block.
IP65 certified (protected from dust, protected from low pressure jets of water from all directions)
Fitting houses two 18W 2ft T8 Lamps
Strong polycarbonate body
Easy install; all fittings supplied
Integral Emergency backup power
Fixing Centre: 420
Circuit Watts: 37
Number of clips: 6
Typical location: Indoor or Outdoor
Lamp Supplied: No
Voltage (V): 220 - 240V 50/60Hz
Class: Class I. Must be Earthed
Photometric Testing: Yes
Instruction sheet: Yes
Pack Includes: Polycarbonate clips. Fixing brackets 20mm compression gland.
To view the manual for this product, Click Here
To complete installation of this product you may require a T8 600mm 18W Bulb.