Fire Seal n Bond from C-Tec is a self extinguishing fire resistant joint sealer that will resist 1100°C in excess of 4 hours. It is the perfect sealant for isolation, maintenance, or repair in areas where there is a risk of fire. This versatile product out-performs all traditional fire rated sealants such as silicone, acrylics, polyurethanes and solid state fillers, and still remains flexible and strong at 1100°C, without shrinkage.
Suitable for bonding most surfaces, and having non-aggressive reactions to synthetic materials, the FSB Fire Seal n Bond is a premium fire-safety product, that can be used then painted, giving you the ultimate protection against fire damages while remaining out of sight.
FSB will create the ultimate fire resistant joint.
Independently tested by IMO.
Will resist 1100 °C in excess of 4hrs
No Cohesive or Adhesive failure.
Blocks the passage of toxic fumes and fire.
Can be applied on wet and dry surfaces.
Suitable for fire resistant substrates Metals, Concrete and many more!
Replaces and out performs silicones, polysulfides, polyurethanes and solid state fillers.
No shrinkage even after 4hrs test at 1100°C and still remains flexible.
Excellent resistance to chemicals.
High bond strength.
Resistant to vibrations.
Density: 21°C / 50% RH 1.4 g/ml
Shrinkage: 21°C / 50% RH none
Skin Cure: 21°C / 50% R$H 20 mins
Full Time Cure (24 Hrs) 21°C / 50% RH 2-3mm
Mechanical Properties w/ 2mm film:
Modulus, 100%: DIN 53504 0.9 Mpa
Hardness: DIN 53505
Tensile Strength: DIN 53504 1.5 Mpa
Elongation at Break: DIN 53504 300%
Application Temperature: +5°C - +40°C
Temperature Resistance: 1100°C in excess of 4 Hrs
Specification Sheet - Click Here
This product is ideally used with a Sealant Applicator Drench Gun