Zexum Red 1.5mm 16A 2 Core & Earth Brown Blue Enhanced Fire Resistant LSF BASEC Approved Power Cable From £2.25


Enlarge Image
StockOptionQuantityPriceRRPSaving
In Stock1 Meter1
£2.25
 £2.68
Save 16%
 
Buy
In Stock5 Meter1
£7.86
 £9.59
Save 18%
 
Buy
In Stock10 Meter1
£14.99
 £18.74
Save 20%
 
Buy
In Stock25 Meter1
£36.84
 £47.16
Save 22%
 
Buy
In Stock50 Meter1
£70.50
 £92.36
Save 24%
 
Buy
Only 9 In Stock100 Meter1
£140.65
 £188.47
Save 25%
 
Buy
Order in the next 10 Hours and 10 minutes for dispatch today
Postage to United Kingdom on this item is FREE
Next Day UK Delivery Available
  • Description
  • Reviews
  • Q&A
Zexum high quality Enhanced Low Smoke Fume Fire Rated Cable, suitable for use with Fire Alarms, Emergency Lighting, Automatic Lift Doors, Air Conditioning and Computer Control Rooms where low smoke, fume and zero halogen cable is required.

A quality, well constucted product which is easily stripped and worked with.

1.5mm² Copper conductor size, Nominal overall diameter 8mm
2 Core & Earth Cable with Brown & Blue coloured indicators
High quality Plain Annealed Copper Conductors, Insulated with Fire Resistant Silicon, Screened with Copper Foil with an outer sheath of Red Low Smoke Halogen Free Thermoplastic.
Weather and moisture resistant, 100m roll comes on a plastic reel for better reeling and to prevent damage
Up to 12 Twists per meter for Data Protection
Suitable for Zone 1 and Zone 2 Hazardous Area Use
Tested to 500v to ensure maximum continuity and maximum current rating of 16A
Suitable for Temperatures between 0°C and +70°C, operating Temperature between -40°C and +90°C
Resistance of 12.1 Ohms/1Km
Voltage Drop (DC or Single Phase AC) 29 Ohms mV / A / m
Capacitance Rating: Core to Core average 70pF/m, Core to Screen average 125pF/m

Tested and certified to BASEC and LPCB to meet the the following standards; BS 5839-1:2013 Clause 26.2e (Enhanced Fire System Cable), BS 8519:2010 Category 2 (Fire Cable Code of Practice), BS7629-1:2008 (Fire Cable Standard), BS8434-2:2003+A2:2009 120 mins (Fire, Mechanical Shock & Water - 120 mins @ 930°C (Water final 60 mins), BS EN 50200:2006 PH30, PH60 & PH120 (Fire & Mechanical Shock - total of 120 mins @ 830°C (MS every 5 mins), BS 6387:1994 Clause 11 CWZ (C - Fire only for 180 mins (3 hours) @ 950°C, W - Fire & Water for 30 mins @ 650°C (Water final 15 mins), Z - Fire & Mechanical Shock for 15 mins @ 950°C  (MS every 30 seconds), BS EN 50267-2-1:1999 (Halogen Emission Standard) and BS EN 61034-2:2005 (Low Smoke Standard). It is also suitable for Emergency Lighting Standard (BS 5266-1:2011), Voice Alarm Systems Standard (BS 5839-8:2013), Voice Communications Standard (BS 5839-9:2013), Irish System Standard (IS 3217:2008) and Irish System Standard (IS 3218:2009/AC:2010).

This Fire Rated Cable is manufactured in the UK using state of the art technology, equipment and materials with product tracing and test processes to ISO 9001. Designed with installers in mind, easy to install with superb working flexibility and simple, easy termination with no troublesome multiple sheaths to strip which as a result saves installation time and effort. The cable cores are designed to provide the highest levels of data protection, ideal for long cable runs and analogue and addressable fire systems.

It is recommended that metal clip spacing is 300mm Horizontal and 400mm Vertical. If using Cable Tie Fastening, spacing every 1.5m

This product will be supplied in a single length up to 100m, unless otherwise requested.

A wide range of cable accessories to match this cable - *Cable Clips*, *connector strip*, *Conduit*
Our Best Selling Zexum Fire Cable
Also Bought
Related Products
Our Best Selling Zexum Products